
On this page
Key takeaways
- Air-con ledges dropped out of strata area for projects under the harmonised rules, which apply to applications from 1 June 2023.
- A 2025 launch at S$2,400 psf can be a similar liveable room to a 2018 resale at S$2,100 psf.
- Measure curtains and invisible grilles to the structural opening, not to the strata figure.
- Compare saleable area and the floor plan, not the psf printed on two different rule sets.
The numbers
- Rule
- URA harmonised GFA for applications from 1 June 2023
- What dropped out
- Air-con ledges and other previously counted external areas
- What you still fit out
- The liveable room, measured to the structural wall
- Curtains
- Measure the opening, not the psf area
The rule in one paragraph
URA harmonised the way floor area is counted so that developers, buyers and the agencies were no longer using different definitions. For residential applications from 1 June 2023, areas such as air-con ledges that used to inflate the strata area are excluded. You stop paying a price per square foot for a concrete shelf you cannot put a bed on.
Why two brochures will not match
Take two 3-bedroom homes with the same living room.
| Older resale, pre-harmonisation | Launch under the new rules | |
|---|---|---|
| Strata area on the price list | Includes the ledge | Ledge excluded |
| Liveable room | The same furniture plan | The same furniture plan |
| Price per square foot | Lower, because the area is larger | Higher, because the area is smaller |
| Cheque you write | Price, not the psf | Price, not the psf |
Divide the price by the area of the rooms you can stand in, not by the number on the cover. Our stamp duty calculator uses the price, which is also what IRAS uses.
Curtains, grilles and the wall you actually have
The glass line in a showflat is often set inboard of the structural frame, and the air-con ledge is outside the new strata area but still outside your window. Curtains and invisible grilles are measured to that opening. A fitter who works off the strata square feet will be short. Curtains.sg measures the opening, including full-height stacks where the ceiling is the slab.
If you are buying the launch because of a Primary 1 address, run the dates through the P1 vacant possession checker before you compare psf at all. A cheap square foot in a project that gets keys too late does not register.
Questions on this topic
Why is the psf on a new launch so much higher than the resale next door?
Part of it is the market. Part of it is the denominator. If the air-con ledge used to be inside the strata area and is now outside it, the same liveable room is divided into fewer square feet, so the psf rises without the room getting more expensive in dollars.
Does a smaller strata area mean a smaller maintenance bill?
Share value and maintenance are set by the developer and the MCST, not automatically by the ledge. Read the share value on the strata title, not the marketing area.
Where do I measure for curtains?
To the structural opening and the curtain wall, including the height to the slab if the glass runs floor to ceiling. The strata area will not tell the installer anything useful. Curtains.sg measures on site for that reason.
Which projects are on the old measurement?
Projects whose planning applications predate 1 June 2023 keep the old basis. A resale completed in 2018 is not comparable, square foot for square foot, with a launch submitted in 2024.
Get a personalised Singapore shortlist and financing check
Share your budget and what you're comparing. We'll reply on WhatsApp with matching units, recent caveats and your exact cash/CPF breakdown.
Sources
Facts on this page were checked against these sources on 26 October 2026.
- URA: Harmonisation of floor area definitions ura.gov.sg, checked 26 October 2026
- URA: Gross floor area ura.gov.sg, checked 26 October 2026
Fact-checked against HDB, IRAS, CPF, MAS.
