Free HDB valuations and condo shortlists WhatsApp +65 9182 3072 Call Contact

B1 vs B2 Industrial in Singapore: What You Can Use, and Whether an Office Is Allowed

B1 is clean and light industry with a 50 m buffer. B2 takes general industry with a 100 m buffer. Ancillary office in either zone stops at 40% of the unit.

Aerial view of Jurong Industrial Estate
Jurong Industrial Estate. Photo: Calvin Teo, CC BY-SA 2.5, via Wikimedia Commons
On this page
  1. B1 vs B2 in one table
  2. Allowed vs not allowed uses
  3. Ancillary office limits
  4. Showrooms, e-commerce, studios, tuition
  5. How to check a unit’s zoning

Key takeaways

  • B1 is clean and light industry. NEA's nuisance buffer from a B1 zone is 50 metres.
  • B2 is for general and special industry. The buffer from a B2 zone is 100 metres.
  • Inside each strata unit, industrial use must be at least 60%. Ancillary office stops at 40%.
  • A showroom can sit in that 40%. It cannot be the whole unit.

The numbers

B1 buffer
50 metres
B2 buffer
100 metres
Industrial share
At least 60% of the unit
Ancillary office
At most 40% of the unit
B2 minimum unit
150 square metres

B1 and B2 are both industrial zones. Neither one is an office zone. The difference is the kind of industry, and how far the nuisance buffer has to sit from neighbours. The office you can put inside the unit is the same idea in both: supporting space, capped at 40%.

B1 vs B2 in one table

URA’s handbooks, read on 31 October 2026, draw the line like this.

Business 1 Business 2 Business Park Commercial
What the zone is for Clean and light industry General and special industry, as well as clean and light Research, high-technology manufacturing and related park uses Offices, shops and other commercial uses
Nuisance buffer 50 metres from the zone 100 metres from the zone Pollutive and bad-neighbour uses are not allowed in the park component Not an industrial buffer
Predominant share At least 60% At least 60% At least 60% of the non-White component, and at least 85% of the whole development in park use Set by the Master Plan and the written permission
Ancillary share At most 40%, including inside each strata unit At most 40%, including inside each strata unit At most 40% of the non-White component Not the industrial 40% cap
Unit size stated by URA Check the written permission Minimum 150 square metres a unit See the Business Park handbook See the approved plan
Typical occupier Light assembly, printing, food packing, listed e-business Heavier manufacturing, warehouses, repair Labs, product development, core media A firm whose approved use is office

Sources: B1 handbook, B2 handbook, B2 guidelines at a glance, Business Park use quantum.

General industry can be considered in B1 only if it meets the buffer the authority sets for that industry, and only after evaluation. Special industries such as shipbuilding are for selected B2 areas, again after evaluation. URA says it can depart from the handbook where the case warrants it, so the written permission still controls the unit in front of you.

Allowed vs not allowed uses

URA publishes example lists and says uses that are not on the list are assessed on their merits. These are the published categories, not a promise about a particular unit.

Proposed use Where URA places it
Light manufacturing, food packing, printing and publishing Predominant use in B1
Core media that needs studios or high-end production facilities Predominant use in B1, B2 and Business Park
Software development, a data centre, an internet service provider E-business, which URA lists as a predominant use
A call centre Business Park and B1. URA says not in B2
General manufacturing, chemical storage, assembly Predominant use in B2
Ancillary office, meeting room, showroom Ancillary, maximum 40%
A shop, restaurant, commercial school or a bank White component, if the site has one. Not the ordinary 60%
A standalone office with no industrial activity Not allowed. The 60% has to be industrial use

The 60:40 checker applies the share to the floor area you type in. A 1,000 square foot strata unit can put at most 400 square feet into ancillary office.

Ancillary office limits

URA’s use quantum pages, both updated 6 June 2026, say the same thing for multi-user buildings. At least 60% of the development is predominant industrial use. At least 60% of each strata unit is industrial use. Ancillary uses, and URA’s own example is “ancillary office, meeting rooms”, shall not occupy more than 40% of that unit.

Common corridors, stairs, lifts, toilets and mechanical space sit in the development-level 40%, together with the secondary uses. They do not give the unit a larger office.

A single-user building that is not strata subdivided can sub-lease, but if it sub-leases to other tenants URA applies the multi-user control, including the cap inside the space that is sub-leased.

Showrooms, e-commerce, studios, tuition

A showroom is on the ancillary list for both B1 and B2. It can be part of the 40%. It is not a reason to leave the other 60% empty, and it is not a shop. A shop is a White-component use.

E-commerce is not one URA category. The e-business uses URA actually names are a data centre that runs on heavy equipment rather than desktop computers, an internet service provider, software development, and a call centre. A call centre can be in B1 and a Business Park, and URA says it cannot be in B2. Packing and storing goods can be an industrial use if it matches the predominant list, such as packing of food or warehousing. A retail shopper experience does not become industrial because the orders arrive online.

A studio is core media only when it is production that needs technical facilities, studios and high-end hardware or software. URA allows that as part of the 60% in B1, B2 and Business Park. A room with a desk and a camera is an office, and an office is ancillary.

Tuition and a commercial school are not on the predominant or ancillary lists. URA places “office (includes bank), commercial school” in the White component. A B1 or B2 unit with no White component is the wrong building for a tuition centre unless a change of use is granted. Start with the approved-use check.

How to check a unit’s zoning

Read three documents, in this order.

  1. The Master Plan zoning of the land, on URA SPACE. B1, B2, Business Park and Commercial are different rows in the table above.
  2. The approved use of the unit. URA’s enquiry is S$54.50 including GST for one unit. If the record is already online, the reply is immediate. If URA has to search, the reply is given in 10 working days.
  3. If the landlord is JTC, the JTC change-of-use and subletting rules as well. URA’s 60:40 rule and JTC’s consent are separate.

The Business Park page covers park zoning. A unit that is already approved as an office in a commercial building does not use this table at all.

Get an introduction

Tell us what you need. The service below is set for this page and you can change it. Fiona replies on WhatsApp.

Fiona Wang (PropNex, CEA R068552B) is a Singapore property agent. For services outside estate agency we introduce you to independent professionals; you choose and pay them directly. If a referral fee or related-party interest applies we will tell you before you engage.

Questions on this topic

What is the difference between B1 and B2 industrial?

URA puts clean and light industry in Business 1, and general and special industry in Business 2. The National Environment Agency's nuisance buffer is 50 metres from a B1 zone and 100 metres from a B2 zone. Both zones use the same 60% industrial and 40% ancillary split, including inside each strata unit.

What does light industrial B1 mean?

URA's Business 1 handbook says clean and light industries are allowed in a B1 zone. The Master Plan written statement describes B1 as clean industry, light industry, public utilities and telecommunication uses for which the authority does not impose a nuisance buffer greater than 50 metres.

What is a B1 building?

It is a building on land zoned Business 1. The zone, not the marketing name, decides the use. Check the Master Plan zoning and the approved use of the unit before you treat it as an office.

What is B1 industrial usage?

Predominant B1 uses listed by URA include light manufacturing, food packing, printing and publishing, core media production, listed e-business activities and industrial training. Ancillary uses include an office, a showroom, a meeting room, a childcare centre and a workers' dormitory, inside the 40% cap.

What is URA Business 2?

Business 2 is the zone for clean, light and general industry, warehouses and special industries such as shipbuilding in selected areas. Call centres, which URA allows in Business Park and Business 1, are not allowed in Business 2.

Get a commercial shortlist

Tell us the use, the size and when you need to move. We'll send offices, shophouses or industrial units that fit, with the reinstatement and fit-out questions flagged before you sign.

Fiona Wang (Wang Ye), PropNex Realty Pte. Ltd.. CEA Reg. No. R068552B. Agency licence L3008022J.

We'll reply on WhatsApp. Your details go only to our agent and are never sold. See our privacy notice.

Sources

Facts on this page were checked against these sources on 31 October 2026.

  1. URA: Business 1 handbook ura.gov.sg, checked 31 October 2026
  2. URA: Business 2 handbook ura.gov.sg, checked 31 October 2026
  3. URA: B1 use quantum, updated 6 June 2026 ura.gov.sg, checked 31 October 2026
  4. URA: B2 use quantum, updated 6 June 2026 ura.gov.sg, checked 31 October 2026
  5. URA: B1 allowable uses ura.gov.sg, checked 31 October 2026
  6. URA: B2 allowable uses ura.gov.sg, checked 31 October 2026
  7. URA: Master Plan 2025 written statement ura.gov.sg, checked 31 October 2026
  8. URA: Business 2 guidelines at a glance ura.gov.sg, checked 31 October 2026

Fact-checked against HDB, IRAS, CPF, MAS.